Cart (0)

Timbers:
Freedom of Expression - CNC Detailing

Advances in wood processing technology, including computer numerical control (CNC) allows for the automated control of machining tools.

CNC machines, combined with computer software, give huge flexibility in design expression. Not all timbers are suitable for the CNC process, and can chip or flake with intricate designs.

Vulcan timber provides an excellent substrate for CNC cut designs. Available in sizes up to 400mm wide and 190mm thick, there are few limitations on dimensions, or dimensional stability.

Vulcan’s low moisture content, high level of stability and fine grain means intricate designs can be easily cut, without damage or breakout.

Vulcan timber is also suitable for above ground exterior application, allowing designers the flexibility to design for exteriors.

Index

Timbers

Calculate

Choose Timber

Choose Profile

Calculating...

Results

Timber: Vulcan Cladding

Type: Rusticated 90x20MM

Lineal Meters:

200.00

Total approximate weight - KG:

268.80

Fixings - Pieces:

485

Oil - Litres (second coat to front face installed):

9

Oil - Litres (one coat all sides + two coats face):

9

Note: The figures given here include 10% wastage and are approximate only. Final order quantities are the buyer’s responsibility and should be checked and verified prior to order placement. Abodo will not accept liability for over or under-ordered items. Thank you!

Enquiry

* Required

Sending...

Thank you for your enquiry. You'll receieve an email with pricing information shortly.