Cart (0)

Maintenance:
How to Fix Timber Screening Elements

Timber Screening is a great way of adding an element of style to your property with minimal maintenance required

Timber Screening – otherwise known as louvres, are becoming increasingly popular as a way to soften facades, while providing shade from the sun.

The fixing of timber screening is almost always custom designed around the building it will be used on.

The most common detail (as used on The Grounds) is a bracket top and bottom with fixing points.

Depending on the span of the screening tie rods may not be required. Maximum vertical spans will depend on the section size being used, for example Vulcan 138x42mm will free span up to 3.0m. This is made possible due to the stability of Vulcan thermally modified timber.

Horizontal spans will be different due to the effects of gravity causing possible sagging of the timber. Check with Abodo prior to specifying.

In all cases ends must be thoroughly sealed and a fall or metal cap applied to the tops to protect the end grain of the timber.

Reference drawings below courtesy of Peddle Thorp Architects

Another popular approach is to router brackets into the edge or ends of the timber screening.

Bowmac New Zealand offer a standard bracket range that may be suitable for fixing timber screening.

Index

Timbers

Calculate

Choose Timber

Choose Profile

Calculating...

Results

Timber: Vulcan Cladding

Type: Rusticated 90x20MM

Lineal Meters:

200.00

Total approximate weight - KG:

268.80

Fixings - Pieces:

485

Oil - Litres (second coat to front face installed):

9

Oil - Litres (one coat all sides + two coats face):

9

Note: The figures given here include 10% wastage and are approximate only. Final order quantities are the buyer’s responsibility and should be checked and verified prior to order placement. Abodo will not accept liability for over or under-ordered items. Thank you!

Enquiry

* Required

Sending...

Thank you for your enquiry - one of our team will be in touch shortly.