Cart (0)

Installation:
Intumescent Fire Retardant Paint for Timber

Fire compliance is becoming problematic for timber weatherboard products, particularly in applications close to a boundary or more than 7m in height

Fire compliance is increasingly becoming problematic for timber weatherboard products – particularly in applications which are close to boundary or more than 7m in height.

Intumescent primers can be used to protect timber from fire risk, and act as a fire retardant. An intumescent primer contains a substance that swells as a result of heat exposure.

Because it increases in volume and decreases in density, intumescents are typically used in passive fire protection applications.

The use of intumescent primers need to be considered as part of a system. Each timber species has its own reaction to fire, and the subsequent top coats of paint, can all affect the way a timber weatherboard reacts to fire.

For this reason it is important to test a specific timber, primer and top coat combination for compliance to the building code, typically using a test method such as ISO 5660.

Talk to the team at Abodo regarding fire retardant timber cladding requirements.

Index

Timbers

Calculate

Choose Timber

Choose Profile

Calculating...

Results

Timber: Vulcan Cladding

Type: Rusticated 90x20MM

Lineal Meters:

200.00

Total approximate weight - KG:

268.80

Fixings - Pieces:

485

Oil - Litres (second coat to front face installed):

9

Oil - Litres (one coat all sides + two coats face):

9

Note: The figures given here include 10% wastage and are approximate only. Final order quantities are the buyer’s responsibility and should be checked and verified prior to order placement. Abodo will not accept liability for over or under-ordered items. Thank you!

Enquiry

* Required

Sending...

Thank you for your enquiry - one of our team will be in touch shortly.